An interceptor gives grease and food solids time to separate from kitchen wastewater. Material left on the walls or around the outlet can narrow the flow path and make internal parts difficult to see. Slow drains or standing water in the sink can point to buildup, though a blocked line is another possible cause. Cleaning addresses residue that may remain after the tank is pumped. Call to describe the problem to a provider near you.
Call (760) 284-4576 to reach a provider →
How interceptors differ from indoor traps
Indoor grease traps are often located near kitchen fixtures, while grease interceptors are usually installed below grade outside the building. Both separate grease and solids from wastewater, but their locations and access points differ.
Interceptors are sized by capacity, commonly from about 500 to several thousand gallons. Their lids provide access to the tank and internal fittings. Knowing which equipment your kitchen uses helps you describe the job and ask for the right service.
What thorough cleaning includes
- Remove the tank contents, including floating grease and settled food solids.
- Clear residue from tank walls so internal surfaces can be seen.
- Clean around inlet and outlet tees to remove accumulated material.
- Clear buildup from baffles and the spaces around them.
- Use water jetting where needed to loosen stubborn deposits.
- Check and clean the sample box if the system has one.
Ask the provider which steps are included and request a service record showing the work performed and any parts that need attention.
Confined space considerations
An interceptor is a confined space where hazardous gases can collect and oxygen levels can be unsafe. An open lid does not make the space safe to enter, even if the tank appears empty.
Providers generally use hoses and tools from above to remove contents and clean accessible surfaces. If work cannot be completed from above, entry requires specific safety procedures and equipment. Keep kitchen staff away from open access points and leave entry decisions to the provider.
Inspecting tees, baffles and lids
The inlet and outlet tees guide wastewater through the interceptor. A damaged or missing outlet tee can allow grease to move toward the sewer instead of staying in the tank.
Baffles help direct flow and keep separated material in place. Once buildup is cleared, cracks, loose fittings or missing sections may be easier to see from above.
Lids should fit securely and allow access for future service. Ask the provider to document visible damage to lids, tees or baffles, and discuss any repair work separately.
How buildup affects inspections
A layer of grease on internal parts can make it difficult to see the condition of a baffle or outlet tee. Buildup in a sample box can also make the wastewater there harder to assess.
Your city or sewer district sets local requirements for interceptor care. Keep service records with the date, work performed and any reported damage so you can show what has been done. Ask the provider to document conditions that may need follow-up.
What affects the price of interceptor cleaning
Tank capacity and the amount of grease and solids inside can affect the work involved. Access matters too: lids may be hard to reach or covered by pavement, equipment or stored materials. Heavy residue on walls and fittings may require more cleaning than a tank with less buildup. Jetting, cleaning a sample box and handling damaged parts can also change the scope of work. Ask what the quoted service includes before scheduling.
Grease interceptor cleaning questions
Is interceptor cleaning different from interceptor pumping?
Pumping removes the contents of the tank. Cleaning also addresses residue on surfaces and fittings, such as the walls, baffles and outlet tee. Ask which cleaning steps are included when discussing the job.
How do I find my interceptor?
Look for access lids outside the building, often near the kitchen side. Building plans or past invoices may show its location. Avoid opening a lid yourself; let the provider know what information you have.
What if parts inside are broken?
Ask for the damage to be documented, including which part is affected. A broken tee or baffle may need repair or replacement. Discuss the repair scope separately with the provider.
Can cleaning happen while the kitchen is open?
That depends on access to the interceptor and whether kitchen water use needs to stop during the work. Discuss your operating hours and equipment location with the provider so you can plan around service.