A pump-out removes the grease and food solids your trap collects during kitchen service. If those layers build up, there is less room for wastewater to separate, and grease can move toward the outlet. Standing water in the sink or odors near the trap can signal a problem, though a blocked line can also affect drainage. Call to describe what is happening to a provider who works in your area.
Call (760) 284-4576 to reach a provider →
What a pump-out removes
A pump-out removes the contents of the trap, including floating grease, wastewater and solids that have settled at the bottom.
A thorough service generally includes clearing residue from the walls and baffles so the inside can be checked. Ask whether the service covers these areas:
- Grease collected at the surface
- Food solids settled on the bottom
- Residue around baffles and the outlet tee
The 25 percent rule and how frequency is set
Many local authorities use the 25 percent rule as a guide. It calls for pumping before floating grease and settled solids together reach 25 percent of the total liquid depth.
The pace of buildup depends on what your kitchen cooks and how much grease goes down the drain. A fryer-heavy kitchen can reach that point in a couple of weeks.
A light-prep kitchen may take far longer. Your city or sewer district sets the applicable schedule, so check local requirements and use your service log to track buildup.
What the provider should leave you
Ask the provider what service records you will receive after the pump-out. These documents help you track maintenance and answer questions during an inspection.
- A waste manifest showing the material removed
- A log entry with the service date
- A record identifying the trap or interceptor serviced
- Notes about any observed damage or buildup
Keep the records where kitchen staff can find them, along with any earlier service documents. Check that the details match your equipment.
Signs you are overdue
- Standing water in the sink during cleanup can point to a drainage problem.
- Slow-draining sinks can mean grease or solids are affecting the flow.
- Persistent odors around the trap can be a sign that contents need attention.
- Grease near the outlet tee can suggest buildup is interfering with separation.
- A thick layer of grease or settled solids can indicate pumping is due.
These signs do not identify the cause on their own. Check your service log and be ready to describe the symptoms.
What happens to the waste after pumping
Grease trap waste contains water, grease and food solids. After removal, it is transported to a facility that accepts this kind of material for handling or treatment.
The receiving facility determines how the waste is processed. Ask the provider where the material will go and keep the waste manifest with your service records. The manifest gives you a record of the material removed from your equipment.
What affects the price of a pump-out
The size of the trap or interceptor and the amount of material inside can affect the price. Access matters too: an indoor trap under equipment or an in-ground interceptor with a hard-to-reach lid may require different work. Other factors include the condition of the contents, the cleaning requested and the handling and disposal of the waste. Describe your equipment and its location when discussing the service.
Grease trap pumping questions
How do I know when my trap was last pumped?
Check your service log, waste manifests and invoices for the most recent date. Look for a record that identifies the correct trap or interceptor, especially if your kitchen has more than one.
Does pumping include cleaning the walls and baffles?
A thorough service generally includes removing residue from the walls and baffles after the contents are pumped out. Ask the provider what is included and whether the outlet tee will also be cleared.
Can I set up a recurring pumping schedule?
You can discuss a recurring schedule with a provider. Use your service log and the rate of grease and solids buildup to guide the discussion, and check the requirements set by your city or sewer district.
Do I need to be on site during the pump-out?
Ask the provider whether someone needs to be present. Access to the trap, interceptor lid or equipment around it may need to be arranged, and someone should know where to keep the paperwork.